When triburt lights lead to a crash, it’s inevitable the lights will be replaced.
However, it is also possible to fix it in time and it will be safer for the rider.
When the lights come on, the rider is expected to stop, and they must be stopped at the very first sign of danger.
The light has to be shut off immediately.
If it is not done, there is a risk of a crash.
The motorcycle’s owner, however, can turn the light off at any time by pressing the power button and holding it for three seconds.
However the rider cannot use the lights for a prolonged period.
This can be done with a push of the button and a few taps.
If the lights are on, there can be no way to tell whether they are functioning or not, as they will be turned off when the rider starts to drive.
In such an instance, the motorcycle will be left with a very poor balance, with the driver almost falling off the motorcycle and getting a puncture.
Even though the motorcycle can be repaired, it would be better to take the motorcycle back to the shop to be fixed.
The issue is related to the way the light is activated.
When it is on, it must be activated with the button pressed, but when the light goes off, it will activate automatically.
There is a safety feature in the bike, called “stopwatch”, which allows the rider to stop the light by pressing a button, but this button can be pressed only if the motorcycle is not moving.
This feature is not a necessity for many people who use their motorcycles as they are comfortable riding them without any interference.
The mechanic who replaced the light did not know how to turn the button off properly.
This is where the mechanic was able to fix the problem in time.
The repair could have taken much longer if the mechanic had not stopped the motorcycle to see if it was moving, as it would have taken a long time to get the light on and the rider could have been seriously injured.
It is the mechanic’s fault and not the owner’s fault.
The owner should have been more attentive and careful.
The mechanics manual of the motorcycle has a warning that when the lights turn on, a signal should be given that the bike is safe to drive and the mechanic should stop.
However there is no such warning.
It is a failure of the mechanic who failed to do the proper thing.
The owner should also take responsibility for what he or she has done.
If a mechanic is not attentive and proper, he or her can do serious damage to the motorcycle.
The rider should also pay close attention to the mechanic.
He or she should always be aware of the bike’s position and be careful not to lose it in traffic.